FTC TRANSFORMEUR modular rigging system

Construction material: stainless steel 304L
Friction anchor material: aluminum
Anchor loops material: 100% polyester; 9 m
Maximum load (MBS) of main (yellow) strap: 15,000 daN with ratchet ( 10,000 daN )
Auxiliary (blue) strap load limit (MBS): 7,000 daN MBS with ratchet (5,000 daN MBS)
Maximum work load (WLL): 2,000 daN
Board dimensions: 45 x 37 cm
Diameter of usable ropes: 13 to 18 mm
Certification: 2006/42/CE for machinery

- brake friction anchor for tree reduction and felling to the rope
with the possibility of configuration to suit the work being carried out
- the base plate is supplied in three variants and the full range can be placed on it
two MINI-CYLINDRES HR friction anchors and a 44 XT winch
- the anchors are designed in such a way that the rope in the system does not touch each other and thus it does not burn
- to achieve maximum friction, the rope can be woven over both anchors
- the winch is separated from the friction device and can be used separately
- the metal structure is made of stainless steel 304L, a technology with high resistance to corrosion
- the anchoring system is installed at the base of the trunk using anchor loops with a ratchet
- the plate is in contact with the trunk using 12 protective rubber pins
- the device can also be installed by one person
thanks to the upper eye on the board and the auxiliary strap with hook ( not included )

Option 1
- complete TRANSFORMEUR - two friction anchors MINI-CYLINDRES HR + winch 44 XT + anchor plate

Option 2
- set of one MINI-CYLINDRES HR friction anchor + winch 44 XT + anchor plate

Option 3
- set of two MINI-CYLINDERES HR friction anchors without winch + anchor plate