EDER RIPJACK 20 mechanical felling wedge
Lifting force 20 t || Wedge travel 100 mm || Weight 2 kg || Driven by ratchet or impact wrench
EDER RipJack 20 is a compact mechanical felling wedge designed for professional timber harvesting. It enables controlled lifting of the trunk while felling trees without the need to hammer in conventional wedges. Its spindle mechanism ensures smooth wedge travel and reduces vibrations transmitted to the tree.
The construction consists of spring-steel plates with a toothed surface, which provide a firm grip in the wood, and a sliding wedge made of special plastic. The wedge can be operated manually with a ratchet or with an impact wrench with a maximum torque of 750 Nm. A SW16 hex drive is used for operation.
If the lift is insufficient, the wedge can be retracted and repositioned higher after the trunk has been secured with safety wedges. Grease nipples allow regular lubrication of moving parts and sliding surfaces.
Technical specifications
Max. lifting force: 20 t
Wedge travel: 100 mm
Lifting wedge height: 60 mm
Spindle pitch: 2 mm
Dimensions: 260 × 80 × 85 mm
Lifting wedge dimensions: 155 × 80 × 60 mm
Weight: 2 kg
Drive: Ratchet or impact wrench
Drive connection: SW16 hex
Max. impact wrench torque: 750 Nm
Material: Spring steel, special plastic
Standard: EN ISO 12100
Country of manufacture: Germany
Package contents
EDER RipJack 20 mechanical felling wedge
Safety instructions
Ratchet, impact wrench and SW16 socket are not included.
Warning: The wedge is designed for felling healthy trees with a normal growth pattern. It is not suitable for trees with a pronounced side or back lean, or for trees weakened by rot. Use requires professional knowledge of safe felling techniques.
| Article MPN | 531000 |
|---|---|
| Certification | EN ISO 12100 |
| Weight | 2 kg |
| Material | steel , plastic |
| Load capacity | 20 t |
| Manufacturing company | Eder Maschinenbau GmbH |
|---|---|
| Address | Schweigerstraße 6, 38302 Wolfenbüttel, Germany |
| info@eder-maschinenbau.de |

