Stainless steel plaque with SINGING ROCK 10 mm stem
10 mm | 25 kN | depth of drilled hole 75 mm
8,03 EUR excl. VAT
Company purchase with 0% VAT || Delivery across Europe within 3 days || Contact || Open MON - FRI: 09:00–16:00
In this category you will find all galvanized and stainless steel plaques , glued staples , hammered joint staples and rivets . They are used by professional trail builders in nature, but also by leisure climbers, for whom a new rivet or staple can save not only the ascent, but also their life, especially on multi-length routes.
10 mm | 25 kN | depth of drilled hole 75 mm
12mm | 25 kN | depth of drilled hole 75 mm
10 mm | 25 kN | depth of drilled hole 75 mm
12mm | 25 kN | depth of drilled hole 75 mm
10 x 80mm | for stem 12 mm | 30 kN
For wide joints in limestone or granite | 2 lengths | unhardened steel
Diameter: 14 mm | 10 cm | 50 kN | 250 g
Diameter: 10 mm | 7 cm | 25 kN | 94 g
33 cm | 680 g
For installing self-tapping expansion rivets | 208g
Stainless steel 316L | for 10 mm shafts
Zinc | 4 mm | Eye size for 2 carabiners | 25 kN
Zinc | 4 mm | Eye size for 2 carabiners | 25 kN
140 g | 25 kN in shear | reuse
35 kN | 116 x 53mm | 170 g
22 kN | 88 g | 39 x 84 mm
188 g | 45 kN | 173.6 x 84.5 x 10 mm
92 g | 45 kN | 82 x 58 x 10 mm
HCR 904 stainless steel for highly corrosive environments | for 12 mm shafts
Stainless steel 316L | for 12 mm shafts
Standard Steel | for 12 mm shafts
Stainless | 3 mm | eye size for 2 carabiners | 25 kN
Stainless | 3mm | eye size for 2 carabiners | 25 kN
Standard Steel | for 10 mm shafts